solved.

bed leveling keeps drifting

994 threads discussed this. Here is what worked. 181 ms

Solved only

  1. Answer for "2)" : The default firmware seems to be Repetier. It also includes Bed leveling (see documentation): https://www.repetier.com/documentation/repetier-firmware/z-probing/ Marlin includes the Auto Bed Leveling…

    Marked as the answer · Tevo Tarantula I3 firmware · 3D Printing Stack Exchange, 2018 · 3 posts · answered on Jadeye’s post, CC BY-SA 4.0

  2. A BLTouch doesn't level the bed, it compensates for the geometry and adjusts print head movement, it is always required to tram (level) the bed with respect to the nozzle X-Y plane (of which the Z is perpendicular to…

    Marked as the answer · Re-doing manual bed leveling · 3D Printing Stack Exchange, 2021 · 2 posts · answered on MyztikJenz’s post, CC BY-SA 4.0

  3. When you do the homing and then do the leveling how much thread you have left that passes the tuning wheel? Verify this on all the four wheels. If you have no thread left then you may consider to lower the Z end-stop.

    Marked as the answer · Ender 3, unable to level the heating bed · 3D Printing Stack Exchange, 2020 · 2 posts · answered on Itzik.B’s post, CC BY-SA 4.0

  4. After disconnecting and reconnecting every cable, and doing a wiggle check on each, it still didn't work.

    Marked as the answer · Ender 5+ stops while bed leveling · 3D Printing Stack Exchange, 2021 · 2 posts · answered on Zartog’s post, CC BY-SA 4.0

  5. Considering this is an Ender, it is probably caused by the rollers on the X axis or the un-driven right Z post.

    Marked as the answer · Ender 3 weird drop in bed level · 3D Printing Stack Exchange, 2021 · 2 posts · answered on Syns’s post, CC BY-SA 4.0

  6. The issues/questions raised about the automatic bed leveling using e.g. a BLTouch probe at this stack require a more in depth description of the automatic leveling functionality in general, this answers aims on…

    Marked as the answer · Automatic Bed Leveling (ABL) with a sensor (BLTouch, inductive, capacitive), how does it work? · 3D Printing Stack Exchange, 2021 · 2 posts · answered on 0scar’s post, CC BY-SA 4.0

  7. After investigating more closely, I was able to level the bed. I removed the whole heater base and checked for any problems below.

    Marked as the answer · FlashForge Adventurer 4 Bed levelling back to front issues · 3D Printing Stack Exchange, 2024 · 2 posts · answered on Andreas Pettersson’s post, CC BY-SA 4.0

  8. I think I fixed everything. What I did is I used this guide <youtu.be/y_1Kg45APko> which was a guide by makes'n'breaks on setting the probe z-offset using pronterface and then reverted to the original firmware that was…

    Marked as the answer · BLTouch not touching bed while leveling · 3D Printing Stack Exchange, 2021 · 2 posts · answered on vicious_hog’s post, CC BY-SA 4.0

  9. No, it is not necessary to call G29 before every print to "auto level the bed" 1) provided that: the bed surface has not changed (e.g.

    Marked as the answer · Using auto-bed leveling, do I need to initiate G29 before every print? · 3D Printing Stack Exchange, 2021 · 2 posts · answered on 0scar’s post, CC BY-SA 4.0

  10. Generally, there is no best way, there are only the ways that work for you. I use a feeler gauge, mounted on a detachable holder.

    Marked as the answer · What’s the best way of leveling the bed? · 3D Printing Stack Exchange, 2021 · 2 posts · answered on Dummy Scripts’s post, CC BY-SA 4.0

  11. Last first: use of a raft has nothing to do with bed levelling. It depends only on the features/shape/etc of the object being printed.

    Marked as the answer · What exactly does automatic bed leveling do? · 3D Printing Stack Exchange, 2018 · 4 posts · answered on Steve In CO’s post, CC BY-SA 4.0

  12. Your config looks fine for the most of the definitions that have been compared to the known settings when using a probe.

    Marked as the answer · Anet A8 Auto Bed Levelling - Auto home not centring with new Marlin 1.1.9 config · 3D Printing Stack Exchange, 2023 · 2 posts · answered on Raynbow’s post, CC BY-SA 4.0

  13. I manually leveled the print bed and lowered the print speed even more for the first layer, which seems to have corrected the issue. Bambu Lab Wiki: A1 mini Bed Tramming

    Marked as the answer · Wrinkles/bubbles on first layer Bambu Labs A1 mini · 3D Printing Stack Exchange, 2025 · 2 posts · answered on Trent Roberts’s post, CC BY-SA 4.0

  14. Bed leveling is disabled by default. So the mesh was scanned but is not apllied after G29 command. To apply the mesh we need to enable bed leveling using command

    Marked as the answer · Auto leveling with Marlin and RAMPS 1.4 does not work · 3D Printing Stack Exchange, 2019 · 3 posts · answered on Sergey Kravchenko’s post, CC BY-SA 4.0

  15. If the cad model was imported from Solidworks into Simplify3D. Push "Center and Arrange" button to place the model in the middle of the Heat Bed. There might be a gap between the object and bed level that is hard to see.

    Marked as the answer · Why does my DIY printer start printing in air? · 3D Printing Stack Exchange, 2018 · 2 posts · answered on 2012User’s post, CC BY-SA 4.0

  16. You need to do two or three things: Print a holder or bracket for the probe, if your probe did not come with one, and looking at the eBay item listing, it doesn't appear to include a bracket.

    Marked as the answer · Anet A6 install bed leveling sensor · 3D Printing Stack Exchange, 2018 · 2 posts · answered on Michael Chourdakis’s post, CC BY-SA 4.0

  17. You do not need to adjust the area yourself for Marlin 2.0, please look into probe.h and into this answer . You only need to enable the offsets:

    Marked as the answer · Auto bed leveling offset issue · 3D Printing Stack Exchange, 2020 · 2 posts · answered on Félix Labelle-Thériault’s post, CC BY-SA 4.0

  18. Using automatic bed leveling assists you in getting the print to stick better to the build platform as a result of the print head following the non-uniform geometry or tilt of the build plate. In, e.g.

    Marked as the answer · Does auto leveling result in sheared prints? · 3D Printing Stack Exchange, 2018 · 2 posts · answered on Horitsu’s post, CC BY-SA 4.0

  19. Actually the sensor reads the bed correctly in terms of shape, not in actual reproducible distance.

    Marked as the answer · Output of G29 bed leveling, Marlin 2.0 · 3D Printing Stack Exchange, 2020 · 2 posts · answered on zwep’s post, CC BY-SA 4.0

  20. I use them both for my Ender 3 home-against-bed and for my delta-calibration probe, and they work reasonably well.

    Marked as the answer · How can microswitch-based automatic bed leveling probes be possibly reliable and accurate? · 3D Printing Stack Exchange, 2024 · 2 posts · answered on Bob Ortiz’s post, CC BY-SA 4.0