bed leveling keeps drifting

…I checked all my belts and made sure the bed is leveled. I print a test cube and it looks perfect. Then I will…

Still open · Ender 3 v2 intermittent problem - clearly visible layers · 3D Printing Stack Exchange, 2021 · 5 posts · answered on Nic7’s post, CC BY-SA 4.0

…It also shows fairly fast if the bed is unleveled as a whole or if the bed is greasy. Please look into: "What are…

Still open · Random lines are being printed? · 3D Printing Stack Exchange, 2020 · 5 posts · answered on Geovenox’s post, CC BY-SA 4.0

…I'm using the bed heated to 45C, in line with the manufacturer's guidance (that a heated bed is optional, but should be…

Still open · Entwined fiber-filled filament stops extruding after a few layers · 3D Printing Stack Exchange, 2019 · 2 posts · answered on Charles Duffy’s post, CC BY-SA 4.0

…Layer separation consistently appears to occur at various levels: sometimes at the interface between the first layer of deposited PMMA (i.e. the first…

Still open · Has anyone had success printing PMMA filament using Lulzbot products? · 3D Printing Stack Exchange, 2021 · 2 posts · answered on S.C.’s post, CC BY-SA 4.0

…The problem is that my jointer bed is 6" wide. Is there an effective process for using the jointer on these wider boards? See…

Still open · Milling wide lumber to square · Woodworking Stack Exchange, 2016 · 5 posts · answered on Ashlar’s post, CC BY-SA 4.0

…Your vat should have markings indicating a maximum level. Filling to the brim will result in a Eureka moment , one much messier than the…

Still open · How much extra resin should put in my vat beyond what the slicer says that it needs? · 3D Printing Stack Exchange, 2022 · 2 posts · answered on Aaargh Zombies’s post, CC BY-SA 4.0

From day one, I had issues with the bed unleveling all the time even if I hadn’t touched it. After watching more videos…

Still open · Ender 3 Pro thermal runaway · 3D Printing Stack Exchange, 2021 · 1 posts · answered on Mjlawson91 ’s post, CC BY-SA 4.0

…I also leveled the bed before re-trying, which didn't solve the issue. I am new to this, I got the printer 3…

Still open · Thermal Runaway E1 Error, Extruder text jumps randomly · 3D Printing Stack Exchange, 2023 · 3 posts · answered on Josh Silveous’s post, CC BY-SA 4.0

…I have to remark that the bottom layer sticks very well to the printing bed. This issue always happens in the next layer after…

Still open · Layers peeling off in resin prints · 3D Printing Stack Exchange, 2022 · 2 posts · answered on Germán’s post, CC BY-SA 4.0

…I have an occasional issue where sometimes when homing, or running the auto-levelling measurements, the needle in the BLTouch will not deploy, which…

Still open · How to properly maintain BLTouch probe? · 3D Printing Stack Exchange, 2025 · 2 posts · answered on Ogre’s post, CC BY-SA 4.0

…100% I have properly calibrated the Esteps/mm and I have levelled the bed correctly. I would really appreciate your help, I'm new…

Still open · Some problems with printing on my Ender 3 · 3D Printing Stack Exchange, 2021 · 2 posts · answered on Maxisy’s post, CC BY-SA 4.0

…I use Slic3r I use 3 mm PLA printed at 190 °C on a 60 °C bed with some glue (doesn't stick without…

Still open · Inconsistent printing results using same settings but different calibration models · 3D Printing Stack Exchange, 2020 · 2 posts · answered on Stefan’s post, CC BY-SA 4.0

…LONG_FILENAMES #define SLIM_LCD_MENUS // Disable 'extraneous' menu items //#define SPEAKER // Disable beeper if you don't want it. //#define LEVEL_BED_CORNERS

Still open · Configuration of the Anet A6 full graphic LCD 12864 on an Anet A8 · 3D Printing Stack Exchange, 2019 · 2 posts · answered on spack2007’s post, CC BY-SA 4.0

…This is the start code I am using (in Ultimaker Cura) How are you manually initiating the bed level? G-code command? (If so…

Still open · I can't get G29 to run BLTouch on my Ender 3 V2 · 3D Printing Stack Exchange, 2021 · 2 posts · answered on Matthew’s post, CC BY-SA 4.0

…change the z offset in your slicer, to a negative of whatever you used to level. 3b) if you manually level and you don…

Still open · Prusa i3 PLA fails to stick to first layer on curves · 3D Printing Stack Exchange, 2018 · 6 posts · answered on jeremiah harless’s post, CC BY-SA 4.0

…printing at cooler temps, increasing print cooling, checking bed leveling, etc. I was setting support in Cura, but switched to MeshMixer, which didn't…

Still open · PLA support material suddenly a problem on Ender 5 · 3D Printing Stack Exchange, 2020 · 2 posts · answered on Gregir’s post, CC BY-SA 4.0

…increasing the minimum layer time Tried different hotend printing temperatures Levelled my bed many times Put my 4.2.2 board back, and produced…

Still open · Can't get rid of horizontal layer lines? · 3D Printing Stack Exchange, 2023 · 2 posts · answered on geekgeek4’s post, CC BY-SA 4.0

…It's my very first print after a couple fails and a lot of calibration to Z axis and bed leveling. Update the printer…

Still open · Weird lines and smaller height · 3D Printing Stack Exchange, 2019 · 2 posts · answered on Eslam Karim’s post, CC BY-SA 4.0

…liquid deposited on a bed and cured with UV light, instead of extruded plastics. This just means that the level of detail you can…

Still open · Is it possible to 3D print sharp objects with high details? And how? · 3D Printing Stack Exchange, 2018 · 5 posts · answered on wass’s post, CC BY-SA 4.0

…just a few layers prior to printing supports at a level above the bed, then turn it on to do the supports, then back…

Still open · 3d Extruder temperature lower automatically (Prusi I3) · 3D Printing Stack Exchange, 2017 · 2 posts · answered on Mahtab Kamal’s post, CC BY-SA 4.0